Treatment Specifications

(ACQ)
   
Fastener and Hardware Recommendations
NatureWood preserved wood products are designed for long-term performance in outdoor applications and, therefore, require high quality, corrosion-resistant nails, screws, and other fasteners. Warning - Certain metal products (including fasteners, hardware and flashing) may corrode when in direct contact with NatureWood products. To prevent premature corrosion and failure it is important to follow the recommendations of the manufacturers for all metal products. Direct contact of NatureWood preserved wood with aluminum is not recommended.
 
NatureWood Weathering Information
Freshly treated NatureWood products begin with a familiar greenish color and will over time turn to a tan/brown color upon exposure to sunlight. As with most wood products, NatureWood products will eventually fade to gray over time.
 
NatureWood Treatment Specifications
 
Table 1. Minimum Retention Requirements for NatureWood Products by End Use
End Use
Preservative
Retention*
(pcf)
Water
Repellent
Materials & Applications
Above-Ground General Use
0.25
Optional
Decks, Playgrounds, Fencing, Trellises, Gazebos, Sill Plates, Porches, Green Houses, Framing, Flooring, Siding, Shakes, Shingles, Trim & Fascia, etc.
Ground & Fresh Water Contact
0.40
Optional
Deck Support Posts, Fence Posts, Docks, Step Stringers, Landscape Timbers, etc.
Critical Structural Members
0.60
Optional
Building Poles, Permanent Wood Foundations, Brackish and Salt-Water Splash
  Table 2. Species of NatureWood Materials
Materials
Sapwood Species
Heartwood Species
Dimensional Lumber & Timbers
Southern Pine
Ponderosa Pine
Red Pine
Radiata Pine
Caribbean Pine
Douglas Fir
Western Hemlock
Hem-Fir
Jack Pine
Lodgepole Pine
Redwood
Plywood
Southern Pine Douglas Fir
Round & Sawn Posts & Building Poles
Southern Pine
Ponderosa Pine
Red Pine
Douglas Fir
Western Hemlock
Hem-Fir
NatureWood products are not currently approved for salt-water immersion applications.
*Preservative Retention expressed as CuO + Quat.
 
 
 
United Treating & Distribution, LLC  338 E. Washington Ave., Ste D,  Muscle Shoals, AL 35661  Phone: 256-248-0944  Fax: 256-386-5244
©2007 United Treating & Distribution, LLC. All Rights Reserved
Site Designed & Hosted by:
Designed & Hosted by AIT, Inc.Advanced
Information
Technologies, Inc.